Instruction manual

Network Camera
13
 Setup:
− Load Default Setup…: Click to return all settings except date/time to the original factory
settings. You can select whether or not network settings will be included when the setup is
applied. Refer to the Network setup for details of the network settings.
− Import Setup…: Click to apply the settings saved as a .dat file format to the camera. A setup
screen appears allowing you to select the setup file. You can select whether or not to include
network settings (except DVRNS setting) when the setup is applied. Refer to the Network
setup for details of the network settings.
− Export Setup…: Click to save the current camera settings as a .dat file format. A setup screen
appears allowing you to name the setup file.
NOTES:
 The Load Default Setup and Import Setup functions are permitted only to the users in the
Administrator group.
 Do NOT check the Include Network Setup box when the network settings of the setup file are
used in another camera. Otherwise, the connection to the camera might not be made properly.
 If the IP address, admin port number or SSL settings are changed during Setup, Remote Setup
closes after saving the changes.
Date/Time
 Date/Time: Change the system date/time, date/time format and time zone. Turn daylight-saving
time on or off by checking the box. Clicking the Apply button applies the changes immediately.
 Time Sync