Instruction manual

User’s Manual
6
Front Side View
① Image Sensor: Converts an optical image of the object
to an electric signal.
NOTE: Cover the image sensor by using the protective
cover provided with the camera when a lens is not mounted
on the camera.
Right Side View
① Protective cover
② C-Mount Ring
③ Back Focus Adjustment
Ring
④ Mount Bracket
 Protective cover: Attach when a lens is not installed to protect the image sensor.
 C-Mount Ring: Attach the ring provided with the camera to the camera when using the C-Mount
lens.
 Back Focus Adjustment Ring: Loose screws and adjust the back focus by turning the ring
clockwise or counter-clockwise, and then tighten the screws to fix the current back focus.
 Mount Bracket: You can attach a bracket to the bottom or top of the camera to mount it. Use
1/4–20 UNC (20 Thread), 2.5mm +/- 0.2 mm (ISO Standard) or 0.197 (ASA Standard) standard
screws when attaching the bracket.
Top View
① Factory Reset Switch: Use to
return all settings to the original
factory settings. See below for
details.