User Manual

15
2. Pairing
Pair the camera with your EVOLVEO Detective POE8/IP8 or WN8 SMART NVR system. The pairing
process is described in the manual of each individual NVR system NVR Detective. Please follow the
instructions given here. Manuals can also be found at www.evolveo.com
on the product page in the
"Downloads" section.
3. Camera installation method
1. According to the position of the holes in the camera base, drill three holes in the wall plate.
2. Insert plastic dowels into the holes.
3. Align the holes of the camera base with the plastic dowels and then secure the camera with the screws.
4. Description of functions
1. Definition: 2M (1920*1080) resolution, high quality and realistic image.
2. Angle of view: The camera is equipped with 104.45° wide-angle optics
3. Motion detection: supports alarm function when motion is detected. If an object moves in the detection
area, an alarm message is sent to the mobile phone in time.
4. Human body detection: If a human body is detected in the detection area, an alarm message is sent to
the mobile phone in time and image recording is started.
5. ONVIF support: The camera supports ONVIF and can be accessed from NVRs from different
manufacturers.
6. H.265 encoding: This technology allows you to store more footage in higher quality
7. Support POE function: It can be powered directly from a wired network and connected to a PoE-enabled
NVR.