Instruction Manual
Table Of Contents
- Obsah / Content / Tartalom / Cuprins
- Obsah
- Důležité bezpečnostní pokyny a varování:
- Okolní prostředí:
- Hlavní funkce
- 1. Instalace pevného disku
- 2. Metoda připojení
- 3. Základní ovládání rozhraní
- 4. Pokyny pro provoz síťového videorekordéru
- 5. Správa pomocí PC
- 6. Vzdálené připojení k aplikaci Tuya Smart APP
- 7. Bezpečnostní opatření
- Obsah
- Dôležité bezpečnostné pokyny a upozornenia:
- Životné prostredie:
- Hlavné funkcie
- 1. Inštalácia pevného disku
- 2. Spôsob pripojenia
- 3. Základné ovládanie rozhrania
- 4. Návod na obsluhu sieťového videorekordéra
- 5. Riadenie pomocou PC
- 6. Vzdialené pripojenie k aplikácii Tuya Smart APP
- 7. Bezpečnostné opatrenia
- Contents
- Important safety instructions and warnings:
- Environment:
- Main functions
- 1. Hard disk installation
- 2. Connection method
- 3. Basic interface control
- 4. Network Video Recorder Operating Instructions
- 5. Management by PC
- 6. Remote connection to Tuya Smart APP
- 7. Security measures
- Tartalom
- Fontos biztonsági utasítások és figyelmeztetések:
- Környezetvédelem:
- Fő funkciók
- 1. A merevlemez telepítése
- 2. Csatlakozási módszer
- 3. Alapvető interfész vezérlés
- 4. Hálózati videorögzítő kezelési útmutatója
- 5. Kezelés PC-vel
- 6. Távoli kapcsolat a Tuya Smart APP-hoz
- 7. Biztonsági intézkedések
- Cuprins
- Instrucțiuni de siguranță și avertismente importante:
- Mediu:
- Funcții principale
- 1. Instalare pe hard disk
- 2. Metoda de conectare
- 3. Controlul interfeței de bază
- 4. Instrucțiuni de utilizare a înregistratorului video de rețea
- 5. Management prin PC
- 6. Conectare de la distanță la Tuya Smart APP
- 7. Măsuri de securitate
54
6. To preview the image, click the corresponding smart camera, enter the real-time image preview page, and
click the [Multi-channel Preview] button to perform simultaneous multi-channel preview as shown below:
7. Security measures
1. Do not place any containers (e.g. vases) with liquid on the VCR.
2. The network video recorder should be placed in a sufficiently ventilated area to avoid blocking the air
vents.
3. Check the power supply and voltage to prevent damage due to voltage mismatch.
4. The network video recorder should operate within the temperature and humidity range allowed by the
technical specifications.
5. The network video recorder should be placed horizontally. Avoid installation in environments with high
vibration.
6. Dust on the circuit board can cause a short circuit when it gets wet. In order to keep the NVR working
normally for a long time, you can periodically use a brush to remove the dust on the circuit
board/interconnect panel/enclosure etc.
7. Improper battery replacement can cause an explosion. It is not recommended to replace the battery
yourself. If you need to replace it, only replace it with the same type of battery, do not attempt to open or
repair the battery.
8. the installation and location of the network video recorder shall be in accordance with the specifications,
which may refer to relevant local standards.