Instruction Manual
Table Of Contents
- Obsah / Content / Tartalom / Cuprins
- Obsah
- Důležité bezpečnostní pokyny a varování:
- Okolní prostředí:
- Hlavní funkce
- 1. Instalace pevného disku
- 2. Metoda připojení
- 3. Základní ovládání rozhraní
- 4. Pokyny pro provoz síťového videorekordéru
- 5. Správa pomocí PC
- 6. Vzdálené připojení k aplikaci Tuya Smart APP
- 7. Bezpečnostní opatření
- Obsah
- Dôležité bezpečnostné pokyny a upozornenia:
- Životné prostredie:
- Hlavné funkcie
- 1. Inštalácia pevného disku
- 2. Spôsob pripojenia
- 3. Základné ovládanie rozhrania
- 4. Návod na obsluhu sieťového videorekordéra
- 5. Riadenie pomocou PC
- 6. Vzdialené pripojenie k aplikácii Tuya Smart APP
- 7. Bezpečnostné opatrenia
- Contents
- Important safety instructions and warnings:
- Environment:
- Main functions
- 1. Hard disk installation
- 2. Connection method
- 3. Basic interface control
- 4. Network Video Recorder Operating Instructions
- 5. Management by PC
- 6. Remote connection to Tuya Smart APP
- 7. Security measures
- Tartalom
- Fontos biztonsági utasítások és figyelmeztetések:
- Környezetvédelem:
- Fő funkciók
- 1. A merevlemez telepítése
- 2. Csatlakozási módszer
- 3. Alapvető interfész vezérlés
- 4. Hálózati videorögzítő kezelési útmutatója
- 5. Kezelés PC-vel
- 6. Távoli kapcsolat a Tuya Smart APP-hoz
- 7. Biztonsági intézkedések
- Cuprins
- Instrucțiuni de siguranță și avertismente importante:
- Mediu:
- Funcții principale
- 1. Instalare pe hard disk
- 2. Metoda de conectare
- 3. Controlul interfeței de bază
- 4. Instrucțiuni de utilizare a înregistratorului video de rețea
- 5. Management prin PC
- 6. Conectare de la distanță la Tuya Smart APP
- 7. Măsuri de securitate
53
4. Follow the instructions on the page to verify that the power to the network video recorder with hard drive
and the network light are steady and blue, and then click the "Next" button to enter the connected device
page as shown below:
5. After successfully connecting the device, select the "Add Device" option, click the [+] button to enter the
connection page, and after being prompted that the addition was successful, click the "Finish" button to
successfully add the device as shown in the figure below: