Instruction Manual
Table Of Contents
- Obsah / Content / Tartalom / Cuprins
- Obsah
- Důležité bezpečnostní pokyny a varování:
- Okolní prostředí:
- Hlavní funkce
- 1. Instalace pevného disku
- 2. Metoda připojení
- 3. Základní ovládání rozhraní
- 4. Pokyny pro provoz síťového videorekordéru
- 5. Správa pomocí PC
- 6. Vzdálené připojení k aplikaci Tuya Smart APP
- 7. Bezpečnostní opatření
- Obsah
- Dôležité bezpečnostné pokyny a upozornenia:
- Životné prostredie:
- Hlavné funkcie
- 1. Inštalácia pevného disku
- 2. Spôsob pripojenia
- 3. Základné ovládanie rozhrania
- 4. Návod na obsluhu sieťového videorekordéra
- 5. Riadenie pomocou PC
- 6. Vzdialené pripojenie k aplikácii Tuya Smart APP
- 7. Bezpečnostné opatrenia
- Contents
- Important safety instructions and warnings:
- Environment:
- Main functions
- 1. Hard disk installation
- 2. Connection method
- 3. Basic interface control
- 4. Network Video Recorder Operating Instructions
- 5. Management by PC
- 6. Remote connection to Tuya Smart APP
- 7. Security measures
- Tartalom
- Fontos biztonsági utasítások és figyelmeztetések:
- Környezetvédelem:
- Fő funkciók
- 1. A merevlemez telepítése
- 2. Csatlakozási módszer
- 3. Alapvető interfész vezérlés
- 4. Hálózati videorögzítő kezelési útmutatója
- 5. Kezelés PC-vel
- 6. Távoli kapcsolat a Tuya Smart APP-hoz
- 7. Biztonsági intézkedések
- Cuprins
- Instrucțiuni de siguranță și avertismente importante:
- Mediu:
- Funcții principale
- 1. Instalare pe hard disk
- 2. Metoda de conectare
- 3. Controlul interfeței de bază
- 4. Instrucțiuni de utilizare a înregistratorului video de rețea
- 5. Management prin PC
- 6. Conectare de la distanță la Tuya Smart APP
- 7. Măsuri de securitate
41
1. Hard disk installation
Caution: turn off the power to the device before installation. 3.5" or 2.5" HDDs up to 8TB can be used.
Step 1: Unscrew the screws on the cover and remove the top cover, picture below.
Step 2: Align the screw holes on the bottom of the HDD and the case and screw in the screws one by one.
Connect the HDD cable and power cable to the motherboard, and connect the other end to the HDD.
Step 3: Cover the top cover and fix it with the screws.
Step 1
Step 2
Step 3
Installation notes:
1. Keep the instrument out of humid, high temperature and highly magnetic environments, place it in a
well-ventilated area.
2. Please use HDDs purchased from verified suppliers.
3. Ensure that the device is properly grounded and that the power supply does not exceed the operating
voltage range, we recommend using the supplied power supply.
4. Do not shut down the device directly when it is running, first shut it down through the software system and
disconnect it to avoid damaging the hard disk.
2. Connection method