User Manual

10
EVOLVEO Alarmex Pro, wireless door/gate/gate detector
Thank you for choosing our product. Please read these
instructions carefully before use.
This product is only compatible with EVOLVEO Alarmex Pro,
a smart wireless WiFi/GSM alarm.
Pair with the control
panel according to the instructions in the EVOLVEO Alarmex
PRO user manual.
Installation
The door sensor consists of one magnetic strip and one
transmitter, which is attached to the door (window) frame
with either double-sided tape or screws.
Remark:
- The transmitter should be parallel to the magnetic strip
and the two parts should be as close together as possible,
the distance should not exceed 10 mm.
- We recommend using screws or a high quality adhesive for
attachment.
- The gap between the magnetic strip and the transmitter
should not exceed 10 mm and attach the magnetic strip to
the right side of the transmitter. Only when a gap is created
between them will the door sensor send an alarm signal.
- Open the door or window. If the indicator on the