Datasheet

2013
PRODUCT OVERVIEW
Wiring
The LSM-15 is wired in the same fashion as a conventional digital switch – it requires a minimum
of 3 wires to operate:
• Black – represents the line input, 120VAC
• White – represents the neutral
• Blue – represents the load (switch leg)
The switch also has a green wire which serves as the ground. While there is a yellow wire
present, it is not needed and should be cut and capped with either electrical tape or a wire nut.
In the case of a 3-way or 4-way circuit, traveler wires are not used when building an Evolve
network. Instead, an LSM-15 may be used in conjunction with an LTM-5 to create a wireless,
“virtual” 3-way. See LTM-5 for further details.