Installation Guide

ManualsBrandsEvolve ManualsBath1-Spray Pattern with 1.25 GPM 3.25 in. Wall Mount Fixed Shower Head Auto Diverting Tub Spout No Mount in Chrome (9-Pack)

SLIP-FIT CONNECTION INSTALLATION

14

Remove the Registration Plate.

16

Fully seat the Auto-Diverting Tub Spout.

15

Before attaching the Auto-Diverting Tub Spout,

press up on the unit’s set screw until it can

move upwards no further (unscrew ﬁrst slightly

if interferring).

Push

13

Tighten the Slip-Fit Quick Connects Receiver’s

four front facing screws. Each screw should be

tightened a little at a time, working in an “X”

pattern until they are fully tightened.