Installation Guide

ManualsBrandsEvolve ManualsBath1-Spray Pattern with 1.25 GPM 3.25 in. Wall Mount Fixed Shower Head Auto Diverting Tub Spout No Mount in Chrome (9-Pack)

SLIP-FIT CONNECTION INSTALLATION

Slide the correct Seal over the water supply

pipe until it touches the Slip-Fit Quick Connect

Back Plate. The small end of either seal should

be facing outwards.

11

½" Copper

½" Galvanized

12

Slide the Slip-Fit Quick Connect Receiver

over the water supply pipe until it is seated

upon the Seal.

6

Place the Registration Plate against the wall

so the water supply pipe ﬁts within its notch.

Adjust so its alignment indicator is vertical.

8

Slide the Slip-Fit Clamp over the water supply

pipe until it’s touching the Registration Plate.

10

Tighten the Slip-Fit Clamp’s set screw.

9

Slide the Slip-Fit Quick Connect Back Plate

over the water supply pipe until it connects to

the Slip-Fit Clamp. It seats via alignment tabs.