Use and Care Manual

Type I or II WRB

Evolve Rainscreen

Interior

Exterior

EVOLVE STONE TYPICAL WALL TYPES - DETAIL #9

Evolve Stone Over Wood Sheathing

Evolve Stone

Wood Framing

Evolve Stone

7/16"

OSB/Plywood

Sheathing

Evolve Stone

7/16" OSB/Plywood Sheathing

7/16" OSB/Plywood

Sheathing

Type I or II WRB

Evolve Rainscreen

Evolve Stone must be installed into a minimum of a 7/16" OSB or 1/2" plywood that is

structurally attached to the studs placed at 16" O.C.

The sheathing must be placed and secured by code, APA instructions and the manufacturer’s

instructions. This substrate must not be water or moisture compromising or degraded by

the

other environmental conditions.

Evolve Stone must be nailed to a sound structural sheathing intended to receive and hold pin nails.

Evolve Stone requires a fully installed water and airtight WRB system prior to the install of the

drainage mat and pin nailed stone.

The WRB system includes flashings, self-adhered joint tapes, flashing tapes, liquid applied WRBS

sealants, doors and windows must be properly installed, made water and airtight, properly flashed

and integrated into the WRB system per code and manufacturer's details and instructions.

The Evolve Rainscreen ensures a clear drainage and drying path.

Note:

Interior installation may

require the OSB to be

painted black or a dark

fabric or paper placed prior

to the install of the Evolve

Stone.

EVOLVESTONE.COM