Instruction manual
32
www.evolutionpowertools.com
MAINTENANCE
NOTE: Any maintenance must be carried out 
with the machine switched off and disconnected 
from the mains/battery power supply.
Check that all safety features and guards are 
operating correctly on a regular basis. Only use 
this machine if all guards/safety features are fully 
operational.
All motor bearings in this machine are lubricated 
for life. No further lubrication is required.
Use a clean, slightly damp cloth to clean 
the plastic parts of the machine. Do not use 
solvents or similar products which could 
damage the plastic parts.
WARNING: Do not attempt to clean by inserting 
pointed objects through openings in the 
machines casings etc. The machines air vents 
should be cleaned using compressed dry air. 
Excessive sparking may indicate the presence of 
dirt in the motor or worn out carbon brushes. If 
this is suspected have the machine serviced and 
the brushes replaced by a qualified technician
Table Insert
A two piece table insert is fitted to this 
machine. If either side is damaged or worn, 
both parts must be replaced. Replacement 
inserts (sold in handed pairs) are available 
from your supplier or Evolution Power Tools.
To replace the table inserts:
• Remove the 3 or 4 cross-head screws that 
secure one of the inserts to the rotary table.
• Lift the insert from the table.
• Remove any debris that may have 
accumulated under the insert.
• Fit the replacement insert, and replace the 
three fixing screws.
• Repeat the process for the other side.
• Check that all 6 or 8 fixing screws are 
tightened securely, and that both inserts 
are lying flush and level within the table.
ENVIRONMENTAL PROTECTION 
Information (for private householders) for the 
environmentally responsible disposal of Waste 
Electrical and Electronic Equipment (WEEE).  
This symbol on products, or accompanying 
documents, indicates that used and end of 
life electrical and electronic equipment should 
not be disposed of with household waste. 
For proper disposal, treatment, recovery 
and recycling, please take these products to 
designated collection points, where they will 
be accepted on a free of charge basis 
Alternatively, in some countries you may 
be able to return your products to your retailer 
upon the purchase of an equivalent new 
product. Disposing of this product correctly will 
help to save valuable resources and prevent 
any potential adverse effects on human health 
and the environment, which could otherwise 
arise from inappropriate waste disposal and 
handling. Please contact your local authority 
for further details of your nearest designated 
collection point. Penalties may be applicable for 
incorrect disposal of this waste in accordance 
with national legislation.
For Business Users in the European Union
If you wish to discard electrical and electronic 
equipment, please contact your dealer or 
supplier for further information.
Information on Disposal in other Countries 
outside the European Union
This symbol is only valid in the European Union. 
If you wish to dispose of this product, please 
contact your local authorities or dealer and ask 
for the correct method of disposal. 










