Instruction manual

31
www.evolutionpowertools.com
FINAL SAFETY CHECKS FOR SELF-ASSEMBLED MACHINES ONLY
All the Yes Boxes must be ticked before the machine can be used. No tick = No use.
Condition Yes
Slides Inserted through the Bevel Neck and connected to the
Cutting Head. Locating lugs successfully deployed
Positive Stop
Locking Lever
Installed onto Locking Mechanism
Mitre Locking
Handle
Installed onto Locking Screw
Power Cable Routed correctly and fastened to back slide bracket.
50 – 60mm max deflection at the midpoint
Blade Blade installed with rotation arrows matching. Outer blade
flange and arbor bolt and washer correctly fitted
Safety Guards Lower Safety Guard fully operational. Cutting Head locks in
the upper position with blade covered. Cutting Head can only
be lowered when Blade Guard Locking trigger is operated
Supply Supply matches specification found on machine Rating Plate.
Plug matches power source outlet
Mounting Either: a) Machine permanently sited and bolted to
workbench
b) Machine mounted on board which is clamped to
workbench (for portable use)
c) Machine bolted to a dedicated Mitre Saw Stand
Sited Adequate provision made for the handling of long or irregular
shaped workpieces
Environment Dry, clean and tidy. Temperature conducive to material
handling. Lighting adequate (double banked if fluorescent
lights are used).