Instruction manual

12
www.evolutionpowertools.com
ADDITIONAL ACCESSORIES
In addition to the standard items supplied with
this machine, other accessories are available
to enhance its performance. These include the
following items:
Additional accessories and information on the
use and type of accessory suitable for your
machine can be obtained by contacting your
local dealer (or Evolution Power Tools).
UNLATCHING AND RAISING
THE CUTTING HEAD
WARNING: To avoid serious injury, NEVER
perform the unlocing or locking procedure
unless the saw is OFF and the blade stopped.
To Release the Cutting Head from the
Locked Down position:
• Gently press down on the Cutting Handle.
• Pull out the head latching pin (Fig. A) and
allow the Cutting Head to rise to its upper
position. (Step 1 & 2)
• The Cutting Head will automatically rise to
the upper position once it is released from
the locked down position. (Step 3)
• It will automatically lock in the upper
position.
If Release is Difficult:
• Gently rock the Cutting Head up and down.
• At the same time twist the Head Latching
Pin clockwise and pull outwards.
NOTE: We recommend that when the machine
is not in use the Cutting Head is locked in
its down position with the latching pin fully
engaged in its socket.
Fig. A
DESCRIPTION PART No
Specialist cutting blades
(use only Evolution Blades
with this machine)
Specific to
blade type
Dust Collection Bag EV3S174 or
SR3S174
Workpiece Support Bars EV3S1 or
SR3S1
End Stop (Repetitive Cutting) EV3SM3 or
SR3SM3
Step 1 & 2
Step 3