Instruction manual

24
www.evolutionpowertools.com
MAINTENANCE
NOTE: Any maintenance must be carried out with
the machine switched off and disconnected from
the mains/battery power supply.
Check that all safety features and guards operating
correctly on a regular basis. Only use this machine
if all guards/safety features are fully operational.
All motor bearings in this machine are lubricated
for life. No further lubrication is required.
Use a clean, slightly damp cloth to clean the plastic
parts of the machine. Do not use solvents or
similar products which could damage the plastic
parts.
WARNING: Do not attempt to clean by
inserting pointed objects through openings in
the machines casings etc. The machines air vents
should be cleaned using compressed dry air.
Excessive sparking may indicate the presence
of dirt in the motor or worn out carbon brushes.
If this is suspected have the machine serviced
and the brushes replaced by a qualified
technician
Table Insert
A one piece table insert is fitted to this
machine. If it is damaged or worn, it must be
replaced. Replacement inserts are available
from Evolution Power Tools.
To replace the table inserts:
• Remove the cross-head screw that
secures the insert to the rotary table.
NOTE: It may be necessary to temporarily
remove or reposition the fence to gain access
to the fixing screw.
• Lift the insert from the table.
• Remove any debris that may have
accumulated under the insert.
• Fit the replacement insert, and replace the
fixing screw.
• If necessary replace and re-align the
fence. (see Fence Alignment and Figs
12 & 13)
• Check that the insert is lying flush and
level within the table.
ENVIRONMENTAL PROTECTION
Information (for private householders) for
the environmentally responsible disposal of
Waste Electrical and Electronic Equipment
(WEEE).
This symbol on products, or accompanying
documents, indicates that used and end of
life electrical and electronic equipment should
not be disposed of with household waste.
For proper disposal, treatment, recovery
and recycling, please take these products
to designated collection points, where they
will be accepted on a free of charge basis.
Alternatively, in some countries you may be
able to return your products to your retailer
upon the purchase of an equivalent new
product. Disposing of this product correctly will
help to save valuable resources and prevent
any potential adverse effects on human health
and the environment, which could otherwise
arise from inappropriate waste disposal and
handling. Please contact your local authority
for further details of your nearest designated
collection point. Penalties may be applicable for
incorrect disposal of this waste in accordance
with national legislation.
For Business Users in the European Union.
If you wish to discard electrical and electronic
equipment, please contact your dealer or
supplier for further information.
Information on Disposal in other
Countries outside the European Union.
This symbol is only valid in the European Union.
If you wish to dispose of this product, please
contact your local authorities or dealer and ask
for the correct method of disposal.