Instruction manual

8
www.evolutionbuild.com
22. Refrain from removing any cut-offs
or other parts of the workpiece from
the cutting area whilst the machine is
running and the saw head is not in the
rest position.
23. Never stand on this tool. Serious injuries
could occur when this tool tips over or when
coming in contact with the saw blade.
Designed to cut:
Mild Steel Plate -
Max Thickness 6mm
Mild Steel Box Section -
Max Wall Thickness 3mm
Aluminium
Wood -
Max section 50mm x 120mm
Technical Data
Motor (230v ~ or 110v ~ 50/60 Hz) 1100W
RPM No Load (min
-1
) 4000
Recommended Maximum Duty Cycle (Minutes)
30mins
Blade Dimensions
Diameter (8
1
/4”) 210mm
Bore Diameter (1”) 25.4mm
Thickness 1.7mm
Maximum Cutting Capacity (Wood)
At 90º mitre x 90º bevel 120mm x 50mm
At 45º mitre x 45º bevel 80mm x 30mm
Noise and Vibration Data
Sound pressure level: 92dB(A) (K = 3dB(A))
Sound power level: 105dB(A) (K = 3dB(A))
Vibration level: 2.694 m/s2 (K = 1.5 m/s2)
The declared vibration total value has been
measured in accordance with a standard test
method and may be used for comparing one
tool with another.
The declared vibration total value may also be
used in a preliminary assessment of exposure.
WARNING: The vibration emission during
actual use of the power tool can differ from
the declared total value depending on the
ways in which the tool is used. The need
to identify safety measures and to protect
the operator are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle, such
as the times the tool is switched off, when it is
running idle, in addition to trigger time).
ADDITIONAL ACCESSORIES
In addition to the standard accessories
supplied with this machine, other accessories
are available to improve its performance,
these include the following items:
1. Clamping System – the design of this
machine allows for the use of a top clamp
which can be fitted either side of the blade
in the sockets incorporated into the fence.
2. Diamond Blade – Convert this machine to
a ‘Tile Cutter’. By replacing the standard TCT
Blade with the optional Diamond Blade, this
machine becomes a tile cutter – suitable for
most ceramic / porcelain tiles.
Additional accessories can be obtained by
contacting your local dealer (or Evolution
Power Tools).
SPECIFICATION
GB