Instruction manual

7
www.evolutionbuild.com
replaced immediately. Beware of ejecting chips
as they may be HOT. Always make provision for
the safe handling of excess material. Keep the
machine base and rotary table free from dirt and
other debris.
To obtain an additional copy of your manual,
please contact Evolution Power Tools at:
UK 0870 609 2297
USA 1-866-EVO-TOOL
WEB www.evolutionpowertools.com
ADDITIONAL SAFETY INSTRUCTIONS
WARNING: Be sure to read and understand all
instructions. Failure to follow all instructions listed
below may result in electric shock, fire and/or
serious personal injury.
1. Know your power tool. Read operator’s
manual carefully. Learn the applications and
limitations, as well as the specific potential
hazards related to this tool.
2. Always wear safety glasses or eye
shields when using this mitre saw.
Everyday eyeglasses have only impact-
resistant lenses; they are not safety glasses.
3. Always protect your lungs. Wear a face
mask or dust mask if the operation is dusty.
4. Always protect your hearing. Wear
hearing protection during extended periods of
operation.
5. Inspect the machines power cord
regularly and if damaged have it repaired
or replaced. Always be aware of the cords
location.
6. Always check for damaged parts.
Before further use of the tool, a guard
or other part that is damaged should be
carefully checked to determine if it will
operate properly and perform its intended
function. Check for misalignment or binding
of moving parts, breakage of parts, and
any other condition that may affect the
tool’s operation. A guard or other part that
is damaged should be properly repaired or
replaced at a qualified service centre.
7. Do not abuse the cord. Never use the
cord to carry the tools or pull the plug from the
outlet. Keep cord away from heat, oil, sharp
edges or moving parts. Replace damaged
cords immediately. Damaged cords increase
the risk of electric shock.
8. Always make sure that your extension
cord is in good condition. When using an
extension cord be sure to use one that is
heavy enough to carry the current that your
tool will draw. An undersized cord will cause a
drop in line voltage, resulting in loss of power
and overheating.
9. Do not use the tool while tired or under
the influence of drugs, alcohol or any
medication. Following this rule will reduce
the risk of electric shock, fire or serious
personal injury.
10. Save these instructions. Refer to
them frequently and use them to instruct
others who may use this tool. If someone
borrows this tool, make sure they have these
instructions also.
11. When the correct blade (RAGE 3B
Multipurpose TCT Blade) is fitted, this saw
is recommended for cutting Mild Steel,
Aluminium and Wood .
12. Do not use High Speed Steel (HSS)
saw blades or blades that are damaged
or deformed.
13. Replace the table insert when worn.
14. Use only saw blades recommended
by the manufacturer and which are the
exact bore and diameter required for
this machine.
15. Connect your mitre saw to a dust
collecting device (I. D.Ø32mm) when
cutting wood. (O.D. 39)
16. Select saw blades in relation to the
material to be cut.
17. Check the maximum depth of cut.
18. When sawing long work pieces, always
use extra support to provide better support,
and use clamps or other clamping devices.
19. The operator is adequately trained in
the use, adjustment and maintenance of
the machine.
20. Provide for adequate room lighting at
your workplace or for adequate lighting of
the immediate work area.
21. When fitted with a laser no exchange
with a different type of laser is permissible.
Repairs shall only be carried out by the laser
manufacturer or an authorised agent.
ADDITIONAL SPECIFIC SAFETY RULES
GB