R120 MXR Original Instructions Original written in UK English Date Published: 22/03/2022
www.evolutionpowertools.com IMPORTANT Please read these operating and safety instructions carefully and completely. For your own safety, if you are uncertain about any aspect of using this equipment please access the relevant technical helpline, the number of which can be found on the Evolution Power Tools website. We operate several helplines throughout our worldwide organisation, but technical help is also available from your supplier. WEB www.evolutionpowertools.com EMAIL UK: customer.
www.evolutionpowertools.com R120MXR-Li SPECIFICATIONS MACHINE SPECIFICATIONS UK/EU/AUS USA 087-0001, 087-0001-K, 087-0001A-K, 087-0001A, 087-0001B, 087-0001B-K, 087-0001C 087-0004, 087-0004A 18V d.c. 20V d.c. 0-650min-1 0-650rpm Weight without paddle (no battery) 3.9kg 8.6lbs Weight with paddle (no battery) 5.1kg 11.
www.evolutionpowertools.com Note: The vibration measurement was made under standard conditions in accordance with: EN 62841-1: 2015, EN 62841-2-10:2017 The declared vibration total value has been measured in accordance with a standard test method and may be used for comparing one tool with another. The declared vibration total value may also be used in a preliminary assessment of exposure.
www.evolutionpowertools.com Keep away from heat and open flames - Do not dispose in fire Symbol Description V Volts A Amperes Min-1 /rpm Speed Max temperature ~ Alternating Current DC voltage n0 No Load Speed Wear Safety Goggles Wear Ear Protection Wear Dust Protection Keep away from water - do not immerse in liquids INTENDED USE OF THIS POWER TOOL WARNING: This product is a Hand Held cordless paddle mixer and has been designed to be used with Evolution mixing paddles.
www.evolutionpowertools.com WARNING: Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow the warnings and instructions may result in electric shock, fire and/ or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. WARNING: Read all safety warnings and instructions.
www.evolutionpowertools.com storing power tools. Such preventative safety measures reduce the risk of starting the power tool accidentally. d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. e) Maintain power tools.
www.evolutionpowertools.com has been deposited on surfaces, hand to mouth contact can result in the ingestion of lead. Exposure to even low levels of lead can cause irreversible brain and nervous system damage. The young and unborn children are particularly vulnerable. You are advised to consider the risks associated with the materials you are working with and to reduce the risk of exposure.
www.evolutionpowertools.com GETTING STARTED - UNPACKING Caution: This packaging contains sharp objects. Take care when unpacking. Remove the machine, together with the accessories supplied from the packaging. Check carefully to ensure that the machine is in good condition and account for all the accessories listed in this manual. Also make sure that all the accessories are complete.
www.evolutionpowertools.com R120MXR-Li MACHINE OVERVIEW 1 2 4 7 3 6 5 8 1. BATTERY PACK 2. LED WORK LIGHT 3. ARBOUR LOCK BUTTON 4. VARIABLE SPEED TRIGGER 5. ONBOARD TOOL STORAGE 6. MOTOR UNIT 7. HANDLES 8.
www.evolutionpowertools.com ASSEMBLY The Mixing Paddle Note: The Evolution paddle mixer is supplied with a multipurpose mixing paddle. Inserting and removing the mixing paddle (Fig.1) 1) Insert the paddle thread into the arbor by turning it clockwise. 2) Tighten the paddle by pushing and holding the arbor lock button and using the wrench supplied tighten the paddle clockwise.
www.evolutionpowertools.com Caution: ALWAYS reduce the speed when submerging the mixer in the material or lifting it out. Once the mixer is fully submerged, increase the speed again to ensure that the motor is adequately cooled. ENVIRONMENTAL PROTECTION LED work light Once the trigger switch is depressed the LED work light will come on. TROUBLESHOOTING Overload protection: The machine has shut down by itself. The machine is too hot! Allow the machine to run at idle speed until it has cooled down.
www.evolutionpowertools.com EC DECLARATION OF CONFORMITY The manufacturer of the product covered by this Declaration is: UK: Evolution Power Tools, Venture One, Longacre Close, Holbrook Industrial Estate, Sheffield, S20 3FR. FR: Evolution Power Tools SAS. 61 Avenue Lafontaine, 33560, Carbon-Blanc, Bordeaux, France.
www.evolutionpowertools.com EC DECLARATION OF CONFORMITY The manufacturer of the product covered by this Declaration is: UK: Evolution Power Tools, Venture One, Longacre Close, Holbrook Industrial Estate, Sheffield, S20 3FR. FR: Evolution Power Tools SAS. 61 Avenue Lafontaine, 33560, Carbon-Blanc, Bordeaux, France.
www.evolutionpowertools.
AUS FR Total Tools (Importing) Pty Ltd 20 Thackray Road Port Melbourne Vic 3207 Evolution Power Tools SAS 61 Avenue Lafontaine 33560, Carbon-Blanc Bordeaux T: 03 9261 1900 T: +33 (0)5 57 30 61 89 UK USA Evolution Power Tools Ltd Venture One, Longacre Close Holbrook Industrial Estate Sheffield, S20 3FR Evolution Power Tools LLC 8363 Research Drive Davenport, IA 52806 T: +44 (0)114 251 1022 T: +1-833-MULTI-SAW (Toll Free) DE +44 (0)114 251 1022 ES +34 91 114 73 85 NL +44 (0)114 251 1022 PL +48 33
