Instruction manual

www.evolutionsteel.com
7
LABELS & SYMBOLS
GB
WARNING: Do not operate machine if warning
and / or instruction labels are missing or damaged.
Contact your supplier for replacement labels.
Symbol Description
V Volts
A Amperes
Hz Hertz
min
-1
Minutes
~ Alternating current
No no load speed
Wear Safety Goggles
Wear Ear Protection
Only use genuine Evolution replacement parts.
Unauthorized parts may be dangerous!
To obtain an additional copy of your manual, please
contact your supplier.
SPECIFICATIONS
GB
Motor (230V ~ 50 Hz) (Watts): 1200
Maximum Cutter Diameter (mm): 42
Maximum Cutting Depth (mm): 50
RPM No Load (min-1 ): 450
Recommended Max Duty Cycle (Mins): 30
Weight (kg): 11.2
Max Dimensions
(Rack Fully Raised) (mm): 570 x 300 x 170
Magnet Dimensions (mm): 40 x 90 x 180
Magnetic Adhesion (kg): 1300 LNF
Cutter Retainer (Weldon Shank)
Internal Diameter (mm): 19
Noise and Vibration Data
Sound pressure level (LpA): 89.4dB(A)
Sound power level (LwA): 102.4dB(A)
K = 3dB(A)
Vibration Data
Ah = 0.629 m/s2
K = 1.5 m/s2
Vibration level:
The declared vibration total value has been
measured in accordance with a standard test
method and may be used for comparing one tool
with another. The declared vibration total value
may also be used in a preliminary assessment of
exposure.
WARNING: The vibration emission during actual
use of the power tool can differ from the declared
total value depending on the ways in which the tool
is used. The need to identify safety measures and
to protect the operator are based on an estimation
of exposure in the actual conditions of use (taking
account of all parts of the operating cycle, such
as the times the tool is switched off, when it is
running idle, in addition to trigger time).
ADDITIONAL ACCESSORIES
In addition to the standard accessories supplied
with this machine, other accessories are available
from your supplier.
These include the following items:
HTA 47
Chuch Adaptor
HTA153
Chuck & Key 13mm
HTA 030
Countersink Bit 0-30mm
HTxxS
Short 25mm Cutters
12mm - 42mm
HTxxL
Long 50mm Cutters
12mm - 42mm