Instruction manual

In Built Protection

The evoUV range of pond clarifiers have thermal overload protection which

automatically shuts down and then enables a fast re-start when the problem

has been cleared. This may be as a result of water in the end caps. Please see

the troubleshooting section on page 17.

Thermal Overload Protection (Only on evo55 and evo110 models) -

This will automatically switch off the unit should the temperature exceed the

maximum operating temperature limits.

Automatic start up and shut down protection - This protects the electrical

components in the event of a power surge.

OUR GUARANTEE

This product is guaranteed against defects in material and workmanship for 2 years

from the date of purchase, under normal usage. The guarantee DOES NOT APPLY

in case of improper use, negligence, lack of maintenance or accidental damage to

the evoUV. If the evoUV fails due to a manufacturing fault within this period it will

be either repaired or replaced free of charge. Liability is limited to replacement of

the faulty product only; no other costs will be reimbursed. This guarantee is not

transferable and does not affect your statutory rights. This guarantee does not confer

any rights other than those expressly set out above. This guarantee does not cover the

evoUV bulb or quartz sleeve.

Tampering with the cover plate or serial number plate will invalidate the warranty.

There are NO user serviceable parts behind these panels.

The manufacturer or supplier shall not be responsible, or held liable for any damages

caused by defective components or materials of this product; or for loss incurred by

interruption of service; or any consequential/incidental damages and expenses arising

from the production, sale use or misuse of this product.

Any warranty claim must be accompanied by a valid, dated proof of purchase.

Evolution Aqua and its dealers shall not be held liable for any loss of fish, plants or

any other livestock as a result of any failure or defect of this product.

The evoUV has a serial number plate attached to the back of the unit. If this serial

number plate has been removed or tampered with, this will void the warranty.

The installation and use of your product outside of our recommendations as printed in

this manual may also void the warranty.