0.8V Li-ION Jigsaw Original Instructions Read instructions before operating this tool.
PURE RANGE - JIGSAW EC - DECLARATION OF CONFORMITY TABLE OF CONTENTS We, the importer Evolution Power Tools Ltd.
10.8V Li-Ion Jigsaw IMPORTANT Please read these operating and safety instructions carefully and completely. For your own safety, before using this equipment check that the voltage is correct and that all handles and parts are firmly secured. If you are uncertain about any aspect of using this equipment, please contact our Technical Helpline. Technical Helpline UK 0870 609 2297 Technical Helpline USA 1-866-EVO-TOOLPURE COMPACT 10.
5. Store idle tools. When not in use, tools should be stored in a dry locked-up place, out of children’s reach. 6. Never force the tools. Your tools will be more efficient and safer when used at the rate for which they were intended. 7. Use the right tool. Do not force small tools to do the job of a heavy duty tool. Do not use tools for purposes not intended; for example do not use circular saws to cut tree limbs or logs. 8. Dress properly.
10.8V Li-Ion Jigsaw You are advised to consider the risks associated with the materials you are working with and to reduce the risk of exposure. You should: -Work in a well-ventilated area. -Work with approved safety equipment, such as dust masks that are specially designed to filter microscopic particles. ADDITIONAL SAFETY RULES FOR YOUR JIGSAW 1. Do not expose to rain or water. 2. Do not drop, shake or strike the battery. 3. Wear hearing protection when necessary.
ANNOTATED PHOTOGRAPH OF JIGSAW 4 3 7 5 2 8 1 6 9 1. KEYLESS CHUCK 2. BLADE GUARD 3. SWITCH SAFETY LOCK SLIDE BUTTON 4. SOFT GRIP HANDLE 5. ON/OFF TRIGGER SWITCH 6. GUIDE ROLLER 7. INSERTED BATTERY PACK 8. BATTERY PACK LOCKING TAB 9.
10.8V Li-Ion Jigsaw SPECIFICATION PURE BATTERY JIGSAW Voltage: No Load Speed: -strokes per minute Stroke Length: Blade Type: Chuck Capacity: 10.8V-DC 0-2000 - Newly purchased Battery Packs do not come fully charged. Please refer to the PURE CHARGER MANUAL for full details on how to charge the Battery Pack for this machine 18 mm T-shank 10 mm 1. INSTALLING OR REMOVING THE BATTERY PACK Check that the battery pack is of the designated type for this machine.
4. TRIGGER SWITCH SAFETY LOCK The trigger switch can only be operated once the safety lock has been disengaged. 1. To disengage the safety lock press the safety lock slide button on either the RH or LH side of the handle. 2. Press the trigger switch to start the machine. 2. Small workpieces should be secured in a vice or clamped to a workbench. Check that the passage of the blade is not obstructed. 3. Larger workpieces should be clamped to sawhorses or similar.
10.
Notes 10
10.
