8V Li-Ion Jigsaw (PUREJIGSAW18V) Original Instructions Read instructions before operating this tool.
PURE 18V Jigsaw EC - DECLARATION OF CONFORMITY TABLE OF CONTENTS We, the importer EC - Declaration of Conformity 02 Important Information 03 12 Month Limited Warranty 03 General Safety Rules 03 Additional Specific Safety Rules 05 Labels and Symbols 06 Jigsaw Overview 06 Specification 07 Operating Instructions 07 Cutting Advice 09 Maintenance 11 Environmental Protection 11 Evolution Power Tools Ltd.
18V Li-Ion Jigsaw IMPORTANT Please read these operating and safety instructions carefully and completely. For your own safety, before using this equipment check that the voltage is correct and that all handles and parts are firmly secured. If you are uncertain about any aspect of using this equipment, please contact our Technical Helpline. UK 0870 609 2297 Congratulations on your purchase of an Evolution Power Tools Pure 18V Battery Jigsaw.
5. Store idle tools. When not in use, tools should be stored in a dry locked-up place, out of reach of children. 6. Do not force the tool. It will do the job better and safer at the rate for which it was intended 7. Use the right tool. Do not force small tools to do the job of a heavy duty tool. Do not use tools for purposes not intended; for example do not use circular saws to cut tree limbs or logs. 8. Dress properly. Do not wear loose clothing or jewellery, they can be caught in moving parts.
18V Li-Ion Jigsaw You should: • Work in a well-ventilated area. • Work with approved safety equipment, such as dust masks that are specially designed to filter microscopic particles. ADDITIONAL SAFETY RULES FOR YOUR EVOLUTION JIGSAW 1. Do not expose to rain or water. 2. Do not drop, shake or strike the battery. 3. Wear hearing protection when necessary. Exposure to noise can cause hearing loss. 4. Cutting/scraping blades and accessories can become very hot.
LABELS & SYMBOLS WARNING: Do not operate machine if warning and/or instruction labels are missing or damaged. Contact Evolution Power Tools for replacement labels. Symbol Description V Volts A Amperes Hz Hertz Min Speed ~ Alternating Current no No Load Speed -1 Double Insulated Wear Safety Goggles Wear Ear Protection JIGSAW OVERVIEW 4 3 5 8 10 11 1 2 6 1. KEYLESS COLLET CHUCK 2. BLADE GUARD 3. SWITCH SAFETY LOCK SLIDE BUTTON 4. SOFT GRIP HANDLE 5. ON/OFF TRIGGER SWITCH 6.
18V Li-Ion Jigsaw SPECIFICATION OPERATING INSTRUCTIONS EVOLUTION PURE BATTERY JIGSAW Note: Before using this tool, read the Instruction Manual carefully. Voltage: No Load Speed: 18.0V-DC 0-2400 strokes per minute Stroke Length: 25.4mm Blade Type: T-shank NOISE AND VIBRATION DATA Sound Pressure: 87.3dB(A) K=3dB Sound Power: 98.3dB(A) K=3dB Vibration: 5.383m/s2 K 1.
2. INSTALLING OR REMOVING A BLADE 3. ON/OFF TRIGGER SWITCH Note: The Battery Pack must be disconnected from the machine when installing or removing the blade. This tool is fitted with a variable speed Trigger Switch that delivers higher speed as the trigger pressure is increased. Installation: The Trigger Switch is also fitted with a brake function which stops the chuck immediately when you quickly release the trigger. • Remove the Battery Pack. • Check that the jigsaw blade is of the correct type.
18V Li-Ion Jigsaw 6. CUTTING ACTION SELECTION SWITCH CUTTING ADVICE This jigsaw has a 4 position switch (0-3) located on the Left Hand side of the machine just behind the blade. Only operate this switch when the machine is switched ‘Off’ and the blade is stationary. Note: Always ensure that the footplate of the jigsaw is in close contact with the workpiece throughout the cutting procedure. If the footplate is allowed to ‘lift’ away from the workpiece operator control and accuracy will be compromised.
CUTTING METAL When cutting any metal a suitable cutting lubricant/coolant should be used. Cast Iron and Brass can be cut without a cutting lubricant. Always use a blade that is capable of cutting metal, and secure the workpiece securely, if practicable, in a vice or similar clamping device. WARNING: When cutting metal the Cutting Action Selection Lever must be set to the ‘0’ position.
18V Li-Ion Jigsaw BLADES Choose blades carefully. Use only a blade that is suitable for this machine and for the material to be cut. The ability of any jigsaw to follow curves, provide smooth finishes or faster cutting is directly related to the type of blade employed. MAINTENANCE Your Evolution Pure Jigsaw requires no major additional lubrication or maintenance. Occasionally apply a drop of light machine oil to the blade guide spindle.
