Instruction manual

®
7
www.evolutionpowertools.com
LABELS & SYMBOLS
WARNING: Do not operate machine if warning
and/or instruction labels are missing or damaged.
Contact Evolution Power Tools or your supplier for
replacement labels.
Note: All or some of the following symbols may
appear in the manual or on the product.
Symbol Description
V Volts
A Amperes
Hz Hertz
Min
-1
Speed
~ Alternating Current
n
o
No Load Speed
Wear Safety Goggles
Wear Ear Protection
Do Not Touch
Keep Hands Away
Wear Dust Protection
Restriction of Hazardous
Substances Directive
CE certification
Waste Electrical &
Electronic Equipment
Read Manual
Warning
Laser Warning
JIGSAW SPECIFICATION
Motor
230V ~ 50Hz ........................................... 710W (6A)
110V ~ 60Hz ........................................ 600W (5.2A)
RPM No Load ....................... 0 - 3000min
-1
(rpm)
Recommended Max Duty Cycle ............30mins
Stroke Length ....................................26mm (1”)
Cutting Capacity
Wood ...........................................80mm (3-3/16”)
Metal ................................................. 8mm (5/16”)
Insulation Class ............................................... II
Weight (Gross) .................................4.1kg (9lbs)
Noise & Vibration Data
Sound Pressure L
P
A .............. 87dB(A) K=3dB(A)
Sound Power Level L
W
A ........ 98dB(A) K=3dB(A)
Vibration Level ................... 3:129 m/s
2
K=1.5m/s
2
Note: The vibration measurement was made
under standard conditions in accordance with:
BS EN 610291.2009.
WARNING: The vibration emission during actual
use of the power tool can differ from the declared
total value depending on the ways in which the
tool is used. The need to identify safety measures
and to protect the operator are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle, such as the times the tool is switched off,
when it is running idle, in addition to trigger time)
ITEMS SUPPLIED
Instruction Manual .........................................1 pc
Hex Key 4mm ................................................1 pc
Footplate Shoe ..............................................1 pc
Jigsaw Blades............................................1 pack
Parallel Edge Guide.......................................1 pc
Dust Extraction Adaptor .................................1 pc
Chip Guard (Front) ........................................1 pc
Chip Guard (Footplate) ..................................1 pc
Batteries ‘AAA’ ..............................................2 pc