Instruction manual

®
6
www.evolutionpowertools.com
WARNING: the operation of any power tool can
result in foreign objects being thrown towards
your eyes, which could result in severe eye
damage. Before beginning power tool operation,
always wear safety goggles or safety glasses with
side shield or a full face shield where needed.
WARNING: If any parts are missing, do not
operate your machine until the missing parts are
replaced. Failure to follow this rule could result in
serious personal injury.

WARNING: This product is a Multipurpose Jigsaw
and has been designed to be used with special
Evolution multipurpose blades. Only use blades
designed for use in this machine and/or those
recommended specically by Evolution Power
Tools Ltd.

this machine can be used to cut:
• Wood
• Wood Derived Products
(MDF, Chipboard, Plywood,
Blockboard, Hardboard. etc)
• Aluminium
• Mild Steel

WARNING: This product is a Multipurpose Jigsaw
and must only be used as such. It must not be
modied in any way, or used to power any other
equipment or drive any other accessories other
than those mentioned in this Instruction Manual.
WARNING: This machine is not intended for
use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have
been given supervision or instruction concerning
the safe use of the machine by a person
responsible for their safety.
Children should be supervised to ensure that they
do not have access to, and are not allowed to play
with, this machine.
VIBRATION
WARNING: When using this machine the
operator can be exposed to high levels of vibration
transmitted to the hand and arm. It is possible that
the operator could develop “Vibration white nger
disease” (Raynaud syndrome). This condition can
reduce the sensitivity of the hand to temperature
as well as producing general numbness.
Prolonged or regular users of sanding machines
should monitor the condition of their hands and
ngers closely. If any of the symptoms become
evident, seek immediate medical advice.
• The measurement and assessment of human
exposure to hand-transmitted vibration in the
workplace is given in: BS EN ISO 5349-1:2001
and BS EN ISO 5349-2:2002.
• Many factors can inuence the actual vibration
level during operation e.g. the work surfaces
condition and orientation and the type and
condition of the saw blade being used. Before
each use, such factors should be assessed,
and where possible appropriate working
practices adopted. Managing these factors can
help reduce the effects of vibration:

• Handle the machine with care, allowing the
machine to do the work.
• Avoid using excessive physical effort on any of
the machines controls.
• Consider your security and stability, and the
orientation of the machine during use.
WORK SURFACE
• Consider the work surface material; its condition,
density, strength, rigidity and orientation.