Instruction manual
®
5
www.evolutionpowertools.com
taking into account the working conditions
and the work to be performed. Use of the power
tool for operations different from those intended
could result in a hazardous situation.
5) General Power Tool Safety Warnings
[Service]
replacement parts. This will ensure that the
safety of the power tool is maintained.
OUTDOOR USE
WARNING: For your protection if this tool is to be
used outdoors it should not be exposed to rain,
or used in damp locations. Do not place the tool
on damp surfaces. Use a clean, dry workbench
if available. For added protection use a residual
current device (R.C.D.) that will interrupt the
supply if the leakage current to earth exceeds
30mA for 30ms. Always check the operation of
the residual current device (R.C.D.) before using
the machine.
If an extension cable is required it must be a
suitable type for use outdoors and so labelled.
The manufacturers instructions should be
followed when using an extension cable.
WARNING: When drilling, sanding, sawing or
grinding, dust particles will be produced. In some
instances, depending on the materials you are
working with, this dust can be particularly harmful
to you (e.g. lead from old gloss paint).You are
advised to consider the risks associated with the
materials you are working with and to reduce
the risk of exposure. Some wood and wood
type products, especially MDF (Medium Density
Fibreboard), can produce dust that may be
hazardous to your health. We recommend the use
of an approved face mask with replaceable lters
when using this machine, in addition to using the
dust extraction facility.
You should always:
• Work in a well-ventilated area.
• Work with approved safety equipment, such as
dust masks that are specially designed to lter
microscopic particles.
WARNING: If you suspect that paint on surfaces
in your home contains lead, seek professional
advice. Lead based paints should only be removed
by a professional and you should not attempt
to remove it yourself. Once the dust has been
deposited on surfaces, hand to mouth contact can
result in the ingestion of lead. Exposure to even
low levels of lead can cause irreversible brain and
nervous system damage. The young and unborn
children are particularly vulnerable.
ADDITIONAL SAFETY RULES FOR YOUR
EVOLUTION JIGSAW
1. Do not expose to rain or water.
2. Wear hearing protection when necessary.
Exposure to noise can cause hearing loss.
3. Cutting/scraping blades and accessories
can become very hot. Take care when changing
or handling any bits or accessories.
operation where the blade may contact hidden
wiring. If the blade contacts a ‘live’ wire, exposed
metal parts of the power tool could become ‘live’
and give the operator an electric shock.
your work.
cables etc) in the path of the blade. Striking
hidden services could cause injury to the user and
damage to the property.
7. Always disconnect the jigsaw from the
power supply before changing the blade.
Never use damaged or distorted blades.
8. Always allow the saw to come to a complete halt
before putting it down. A running tool may bounce
uncontrollably if the blade tip contacts any surface.
9. Always consider the work environment
and wear the appropriate personal protection
This could include dust masks, eye
protection, safety footwear etc.