® Multipurpose 18V Lithium-Ion Jigsaw Supplied With Battery & Charger Original Instructions Read instructions before operating this tool. www.evolutionbuild.
® TABLE OF CONTENTS EC - DECLARATION OF CONFORMITY EC - Declaration of Conformity 2 We, the importer Figures 3 Important Information 4 Evolution Power Tools Ltd.
FIGURES FIGURE 1 FIGURE 2 FIGURE 3 FIGURE 4 FIGURE 5 FIGURE 6 FIGURE 7 FIGURE 8 www.evolutionbuild.
® IMPORTANT Please read these operating and safety instructions carefully and completely. For your own safety, before using this equipment check that the voltage is correct and that all handles and parts are firmly secured. If you are uncertain about any aspect of using this equipment, please contact our Technical Helpline.
GENERAL SAFETY RULES WARNING When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury. Please read all of these instructions before attempting to operate this machine. Save this manual for future reference. 1. Keep work area clear. Cluttered work areas invite accidents. 2. Consider work area environment. Do not expose tools to rain. Do not use tools in damp or wet locations. Keep work area well lit.
® 22. Have your tool repaired at an authorised service centre. This electric tool complies with current safety rules. Repairs should only be carried out by an authorised service centre using original spare parts. Failing this, the user could expose themselves to considerable danger. HEALTH ADVICE Warning! When drilling, sanding, sawing or grinding, dust particles will be produced. In some instances, depending on the materials you are working with, this dust can be particularly harmful to you (e.g.
SAFETY RULES FOR YOU EVOLUTION BATTERY CHARGER WARNING! READ AND UNDERSTAND ALL OF THESE INSTRUCTIONS. SAVE THESE INSTRUCTIONS FOR FUTURE OPERATOR USE. 1. Do not use the charger outdoors or expose to wet or damp conditions. Water entering the charger will increase the risk of electric shock. 2. Use this charger only with the designated rechargeable battery packs. Other types of battery may overheat and burst causing personal injury or damage. 3. Do not abuse the charger cord.
® CARE OF YOUR PURE BATTERY PACK 1. Do not charge the battery pack when the temperature is below 0°C (32°F) or above 40°C (104°F). 2. Always protect the battery terminals when the battery pack is not used. 3. Do not short the battery pack. Warning: A battery short can cause a large current flow, overheating, possible burns and even irreparable damage to the battery. 4. Do not touch the terminals with any conductive material. 5.
Machine Overview 4 3 5 8 10 7 11 1 2 6 12 13 9 1. KEYLESS COLLET CHUCK 8. BATTERY PACK LOCKING TAB 2. BLADE GUARD 9. FOOTPLATE 3. SWITCH SAFETY LOCK SLIDE BUTTON 10. LASER GUIDE ON/OFF SWITCH 4. SOFT GRIP HANDLE 11. ORBITAL ACTION CONTROL SELECTOR 5. ON/OFF TRIGGER SWITCH 12. CHARGER 6. GUIDE ROLLER 13. FOOTPLATE ANGLE GUIDE 7. INSERTED BATTERY PACK www.evolutionbuild.
® SPECIFICATION FUNCTIONAL DESCRIPTION EVOLUTION BATTERY JIGSAW & CHARGER Note: Before using this tool, read the instruction manual carefully. JIGSAW Voltage: No Load Speed: Stroke Length: Blade Type: BEFORE USE A Battery Pack must be inserted into the tool as detailed below. It is important that the Battery Pack is of the designated type recommended for this machine. CHARGER Input: Output Charging Time: BATTERY PACK Battery Voltage: Battery Capacity: 18.0V-DC 0-2400 strokes per minute 25.
CHARGING INDICATOR This charger is designed to detect problems that can sometimes arise with rechargeable battery packs. The status of the two LED’s can alert the operator to potential problems. Please refer to the table below.
® 3. ON/OFF TRIGGER SWITCH - See Fig 4 This tool is fitted with a variable speed trigger switch that delivers higher speed as the trigger pressure is increased. The trigger switch is also fitted with a brake function which stops the chuck immediately when you quickly release the trigger. 4. TRIGGER SWITCH SAFETY LOCK - See Fig 4 The trigger switch can only be operated once the safety lock has been disengaged. 1.
OPERATION GENERAL CUTTING Note: Always ensure that the footplate of the jigsaw is in close contact with the workpiece throughout the cutting procedure. If the footplate is allowed to ‘lift’ away from the workpiece operator control and accuracy will be compromised. 1. Clearly mark out the cutting line to be followed on the workpiece (use a pencil or other suitable marking device). 2. Small workpieces should be secured in a vice or clamped to a workbench. Check that the passage of the blade is not obstructed.
® Note: Angled cutting, whatever the material, is always more difficult than general straight cutting. With angled cutting it is very important to allow the saw blade to do the work. Do not ‘force’ the blade. A trial run on unwanted material to determine the best combination of blade feed and speed is recommended. BLADES Choose blades carefully. Use only a blade that is suitable for this machine and for the material to be cut. Return to the factory setting when angled cutting is completed.
Parts Lists www.evolutionbuild.
®
