Specifications

13
www.evolutionpowertools.com
EN
ES
FR
d) Always observe that the lower guard
is covering the blade before placing
saw down on a bench or the floor. An
unprotected, coasting blade will cause the
saw to walk backwards, cutting whatever is in
its path. Be aware of the time it takes for the
blade to stop after switch is released.
e) Do not use High Speed Steel (HSS) saw
blades.
f) Inspect the machine and the blade
before each use. Do not use deformed,
cracked, worn or otherwise damaged blades.
g) Never use the saw without the original
guard protection system. Do not lock the
moving guard in the open position. Ensure that
the guard operates freely without jamming.
h) Only use blades that comply with the
specifications in this manual. Before using
accessories, always compare the maximum
allowed RPM of the accessory with the RPM of
the machine.
WARNING: If any parts are missing,
do not operate your machine until the missing
parts are replaced. Failure to follow this rule
could result in serious personal injury.
GETTING STARTED - UNPACKING
Caution: This packaging contains sharp
objects. Take care when unpacking. Remove
the machine, together with the accessories
supplied from the packaging. Check carefully
to ensure that the machine is in good
condition and account for all the accessories
listed in this manual. Also make sure that all
the accessories are complete. If any parts
are found to be missing, the machine and its
accessories should be returned together in
their original packaging to the retailer. Do
notthrowthepackagingaway;keepitsafe
throughout the guarantee period. Dispose
of the packaging in an environmentally
responsible manner. Recycle if possible. Do
not let children play with empty plastic bags
due to the risk of suffocation.
ITEMS SUPPLIED
Description Quantity
Instruction Manual 1
Parallel Edge Guide 1
Auxiliary Front Handle 1
Wrench (Blade Change) 1
9” Steel Cutting Blade
(Where applicable)
1
Carbon Brush Set 1
Carry Case 1
Batteries ‘AAA’ 2
Safety Goggles 1
Ear Plugs 1 Set
ADDITIONAL ACCESSORIES
In addition to the standard items supplied
with this machine the following accessories
are also available from the Evolution online
shop at www.evolutionpowertools.com
or from your local retailer.
Description Part No
230mm (9”) Mild Steel 230BLADEST
230mm (9”) Thin Steel 230BLADETS
230mm (9”) Stainless Steel 230BLADESS
230mm (9”) Aluminium 230BLADEAL