Use and Care Manual

VIBRATION
WARNING: When using this machine the
operator can be exposed to high levels
of vibration transmitted to the hand and
arm. It is possible that the operator could
develop “Vibration white nger disease”
(Raynaud syndrome). This condition
can reduce the sensitivity of the hand to
temperature as well as producing general
numbness. Prolonged or regular users of
mitre saws should monitor the condition
of their hands and ngers closely. If any
of the symptoms become evident, seek
immediate medical advice.
• The measurement and assessment of
human exposure to hand-transmitted
vibration in the workplace is given in:
BS EN ISO 5349-1:2001 and
BS EN ISO 5349-2:2002
• Many factors can inuence the actual
vibration level during operation e.g the
workpiece and the type and condition of
the cutter being used. Before each use,
such factors should be assessed, and where
possible appropriate working practices
adopted. Managing these factors can help
reduce the eects of vibration:
Handling
• Handle the machine with care, allowing
the machine to do the work.
• Avoid using excessive physical eort on
any of the machines controls.
Workpiece
• Consider the workpiece material;
its density, strength and rigidity.
• Consider the security, stability,
and orientation of the machine.
SAFETY LABELS & SYMBOLS
WARNING: Do not operate this machine if
warning and / or instruction labels are missing
or damaged. Contact Evolution Power Tools for
replacement labels.
NOTE: All or some of the following symbols
may appear in the manual or on the product.
Symbol Description
V
Volts
A
Amperes
Hz
Hertz
Min
-1 (RPM)
Speed
~
Alternating Current
n
o
No Load Speed
Wear Safety Goggles
Wear Ear Protection
Do Not Touch,
Keep hands away
Wear Dust Protection
CE certication
Waste electrical and
electronic equipment
Read Manual
WARNING
Laser Warning
Double Insulation Protection
CSA certication
INTENDED USE OF THIS
POWER TOOL
WARNING: This product is a Multipurpose
Sliding Mitre Saw and has been designed to
be used with special Evolution Multipurpose
blades. ONLY use blades designed for use in
this machine and / or those recommended
specically by Evolution Power Tools Ltd.
7
www.evolutionpowertools.com
EN
ES
FR