Use and Care Manual

6
www.evolutionpowertools.com
GENERAL SAFETY INSTRUCTIONS
Read these instructions before using this
mitre saw stand. Do not modify or use this
stand for any purpose other than that for
which it was designed.
• Keep work area clear of obstructions
and well ventilated. Clutter makes
accidents more likely.
• Consider the work area environment.
Do not use power tools in damp or wet
conditions. Keep the work area well lit.
Do not use power tools in the presence
of ammable liquids or gases.
• Keep children and bystanders away.
Visitors are a distraction and are dicult
to protect and are unlikely to have any
knowledge of safety procedures.
• Store idle equipment. Preferably in a
locked dry cupboard.
• Safety Glasses. Approved safety glasses
should be worn by the operator and any
assistants when using a mitre saw.
• Stay alert. A moments inattention when
operating power tools may result in serious
personal injury. Do not use if tired or under the
inuence of drugs, alcohol or medication.
• Do not overreach. Keep proper footing
and balance at all times.
STAND SPECIFIC SAFETY INSTRUCTIONS
• Formaximumstabilityusethemitrestand
only on a at, level surface.
• Becarefulwhenraisingorloweringthe
stand to prevent trapped ngers or hands.
• Ensurethatthesnapbuttonsoneachleg
are in the locked position. This will ensure
that the stand remains rigid during
cutting operations.
• Donotsteporclimbonthestand.
• Beforeoperationensurethatthemitresaw
is securely fastened to the stand to prevent
unwanted movement of the saw.
• Ensurethatthematerialsupportsare
locked in place before use.
• Do not overload the side extension arms.
• Donotuseifthestandbecomesdamaged
in any way.
The main frame can support 150kg (330lb)
total weight (saw + material).
Do not exceed this weight for any reason.
STAND FEATURES
• Lightweighttubularframewithø45mm
tubular legs and crossbars.
• Extensionrailsadjustabletogiveroller
support centres from 860mm (min) to
1620mm (max).
• Mountsmostmitresaws.
• Heighttosawmountingbase750mm
• Heightadjustableworksupportextensions,
support work pieces on 230mm long rollers
which are equipped with repeat cutting
stops.