Owner's Manual

9
Log-set / Crystal Ember Installation
(NOTE:Please make the installation according to the embers which you bought orselected.)
A. Glass front must be removed and the appliance must be mounted in its final location
before the log-set / crystal / pebble embers are installed.
B. If you
r
fireplace come with log-set, You do not need to do anything
j
ust use as it is . Figure1.
C. To switch to Crystals, firstly take the Log-set out of the fireplace slot, then Place the plastic tray
( J ) to the fireplace designed place.Then carefully place crystal embers into the plastic tray as
illustrated. Apply an even layer from side to side. Figure 2, Figure 3.
Figure 1
Figure 2
Figure 3. (Crystal medias)
HARD WIRING INSTALLATION
HARD WIRING CONNECTION
If it is necessary to hard wire this appliance, a qualified electrician must remove the cord connection, and wire
WARNING
TURN OFF THE APPLIANCE COMPLETELY AND LET COOL BEFORE SERVICING. ONLY A QUALIFIED SERVICE
PERSON SHOULD SERVICE AND REPAIR THIS ELECTRIC APPLIANCE.