.36NT Control Line Evolution Engine ® US E R GUIDE
Introduction Congratulations on your purchase of the newest and one of the most technically advanced 2-stroke model airplane engines in the world. Whether you are new to the sport of model aviation or an experienced flier, you will enjoy the features of the new Evolution® Engines Control Line (CL) Engine. The Evolution CL Engine is designed to be the most powerful yet controllable in its class, extremely easy to start and operate, and provide years of enjoyable service.
Mounting the Engine Installing the Muffler The muffler mounting accessory package includes mounting screws (2), lock washers (2), muffler gaskets (2) and an L- wrench. Securely tighten all engine mounting screws and re-check tightness before each flying session. All model airplanes include an engine mount of some type. It is extremely important that the engine be securely mounted to the airplane’s engine mount. Follow the instructions included with the airplane for mounting the engine.
Attaching the Propeller and Spinner Attaching the Fuel Lines Using medium silicone fuel tubing, attach the fuel tank’s clunk line to the fuel nipple. This line will supply fuel to the engine. Attach the vent line to the muffler pressure nipple. This line pressurizes the fuel tank with the muffler pressure, creating consistent fuel flow, regardless of the airplane’s attitude. Fuel Line Vent Line Securely tighten the prop nut using an adjustable wrench.
prop counter-clockwise through 6 -10 complete revolutions, thus priming the engine. Have a helper hold your airplane. Step 4. Attach the glow driver. Step 5. Turn the engine over using an electric starter. The engine should fire within seconds of applying the starter. Step 6. Remove the glow driver. Step 7. Allow the engine to run for 30 seconds. And then adjust the needle valve for your desired ground rpm.
Why would fuel go “bad”? The largest portion of the fuel is methanol (alcohol). Methanol is hygroscopic; it attracts moisture. This can cause your fuel to be contaminated with water, which will cause poor engine performance. Additionally, the UV rays in sunlight will eventually break down the nitromethane if the fuel jug is stored in sunlight for long periods of time.
Evolution Control Line Engine Specifications Disp (c.i.) .354" Items EVOE0365 Bore (mm) .806" Stroke (mm) .695" Weight (oz) 9.
WARRANTY INFORMATION Warranty Period Exclusive Warranty- Horizon Hobby, Inc., (Horizon) warranties that the Products purchased (the “Product”) will be free from defects in materials and workmanship for a period of 2 years from the date of purchase by the Purchaser. Limited Warranty (a) This warranty is limited to the original Purchaser (“Purchaser”) and is not transferable. REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE PURCHASER.
your email to productsupport@horizonhobby.com, or call 877.504.0233 toll free to speak to our product support staff. Inspection or Repairs If this Product needs to be inspected or repaired, please call for a Return Merchandise Authorization (RMA). Pack the Product securely using a shipping carton. Please note that original boxes may be included, but are not designed to withstand the rigors of shipping without additional protection.
No. Description No.
Cross-Reference of Evolution .36 CL Part Number # Description .
© 2008 Manufactured Exclusively for Horizon Hobby, Inc. 877-504-0233 www.horizonhobby.
