User Manual

4
EN
1. Secure the engine mount on the airplane
firewall. Tighten the engine mount screws in
the firewall.
2. Install the engine on the engine mount
according to the airplane manufacturer’s
instructions.
WARNING: Tighten all engine mounting
screws before each flight. If you do not
tighten the engine mounting screws, the
screws may vibrate loose and cause the
engine to separate from the fuselage.
Included Content
Engine
EVOA113 Evolution
®
RPM Telemetry Adapter
EVOA121 Sintered Plastic Filter Clunk
EVOG10300 Ignition Unit
EVOG10350 Spark Plug
EVOG10601B Muffler
EVO100E46A Muffler Screws & Gasket
Optional Items
APC10060 (APC12060) 10 x 6 propeller (break-in) (12 x 6 propeller (normal flight))
EVOA100 Optical Electronic Ignition Kill Switch
EVOA102 (EVOA103) Medium Gas-FKM Fuel Tubing 1 meter (3 meters)
EVOA108 Evolution Locking Fuel Can Cap
EVOA112 Evolution 3 Wire Ignition/Receiver Switch
HAN155 Ultra Fuel Pump
HAN156 Tachometer
Installing the Engine
A
B
C
D
E
F
A. Spark Plug
B. Muffler
C. Low-speed Needle
D. Throttle Arm
E. Fuel Inlet
F. High-speed Needle