Owner's Manual

15
www.evolurbaby.com/help
Bolt 2-1/2” (×2)
G
CONVERSION MODES - DAYBED ASSEMBLY
1
1a. In order to convert the
crib to a Daybed, you
must first remove the
Footboard of the crib.
1b. Fix the Right Top Cap (8)
at the top of the Right
Front leg and Left Top
Cap (9) at the top of the
Left Front Leg attached
to the side panel, with the
help of Bolts (G) provided
(refer to the diagram).
1c. Then, attach the
Stabilizer Bar using the
bolts from the Footboard
removal.
1d. Make sure to follow the
complete instructions
provided with the Toddler
Guard Rail.
Guard Rail and Stabilizer Bar (NOT INCLUDED, SOLD SEPARATELY)
NOTE:
*Make sure mattress support is at
the lowest position.
*Make sure to use the Stabilizer
Bar that is included with Evolur
Universal Toddler Guard Rail
(SKU- 846) to convert the crib to a
Day bed.