User guide

Step 3 - Conguring the new print head

Power up the printer and check that it is properly connected to a computer on which the printer’s Evolis Print Center is

installed.

In Maintenance of Evolis Print Center, click on the Change print head tab.

Enter the PKN number of the print head kit in Enter PKN no., the number you noted down in step 2. Then click Conrm.

If the print head kit number is not entered correctly, printer malfunctions may occur and the warranty may be

voided.

Step 4 - Cleaning the printer

On your printer’s control panel, the “CLEANING” light is lit:

Cleaning is absolutely necessary after changing the print head. No print jobs can be run until the cleaning

operation has nished.

Refer to section 3 – Maintenance to carry out cleaning.

Once cleaning has been carried out, your printer is once again ready to customise your cards.

CLEANING