User guide

4-3b FREEING JAMMED CARDS
Control panel displays:
Do not turn off your printer as this cancels pending print jobs in the printer’s memory.
Remove the card as follows:
Ê
Open the printer cover and remove the ribbon.
Ë
Press the pushbutton to turn the card transport rollers. If the card is still stuck inside the printer, slide it manually towards
the printer output. If there is more than one card, always push the top one rst.
Ì
Replace the ribbon, then close the printer cover.
To prevent card jams:
Ê
Check that the card thickness gauge is correctly adjusted.
Ë
Check that the thickness of the cards used matches the specications set out in Appendix A “Technical specications”
in this manual.
Ì
Check that the cards are at. Keep them in a horizontal position.
Í
Check that the cards are not stuck together. Shufe the cards before loading them.
n Card jammed in the printer. Print jobs are interrupted.
MECHANICAL ERROR
39
4