User guide

3-3b SERVICING THE PRINT HEAD

Recommended cleaning cycle: every 5 routine cleaning cycles.

Servicing accessory: cleaning pen

Unplug the printer from its power supply before cleaning the print head.

Follow the cleaning cycles scrupulously.

Avoid any contact between the print head and any metal or sharp objects.

Avoid touching the print head directly with your ngers, as this could affect print quality or permanently damage

the print head.

The cleaning pen can be used up to 8 times for cleaning the print head.

Follow the procedure below:

Remove the cover from the cleaning pen.

Unplug the power supply cable, open the cover then nd the print head.

Gently rub the pen from left to right along the print head for a few seconds.

Close the cover. Reconnect the printer.

Wait for 2 minutes after cleaning before using your printer.

Ê Ë Ì Í