User`s guide

PPrree--iinnssttaallllaattiioonn aaccttiivvaattiioonn

Before installing the printer, please perform the following operations:

CCoonnnneecctt tthhee pprriinntteerr ttoo tthhee mmaaiinn ppoowweerr

ssuuppppllyy

Turn off the printer by pulling the plug out of the

socket, which must always be accessible.

This product must be connected to an electrical

installation that is correctly protected and grounded.

FI: Laite on liitettävä suojamaadoitus koskettimilla

varustettuun pistorasiaan

NO: Apparatet må tilkoples jordet stikkontakt

SE: Apparaten skall anslutas till jordat uttag

1. Connect the power supply cord to the power supply, then attach the power cord

connector to the printer.

2. Then connect the end of the power supply cord to a grounded system outlet.

3. The printer is under power. The light on the control panel comes on and the

print head rises and falls to indicate the correct mechanical working of the

er. If the light fails t

o come on, this means that the installation has not

been carried out correctly or possibly that the printer is not working pro-

perly. Check the installation.

Prior to any maintenance action, always disconnect the power supply

cable.

For your own safety, these components must remain accessible at all

times to permit emergency action

This product must be connected to a correctly protected and grounded electrical ins-

tallation

CCoonnnneecctt tthhee UUSSBB ccaabbllee

The data USB cable must never be connected before the installation of the

printer driver has been completed.

Refer to Chapter 2 and carefully follow these instructions.