User`s guide

TTrroouubblleesshhoooottiinngg
I
n this chapter, you will find out how to resolve certain problems that can arise while you are working.
Never use a metal tool or object to work on your equipment: you run the risk of hurting
yourself or damaging all or part of the equipment.
FFrreeee aa ccaarrdd jjaammmmeedd iinn tthhee pprriinnttiinngg uunniitt
When a card is jammed in the printing unit, the LEDS from the
control panel are as shown:
Work is interrupted.
Do not turn off the unit: this would lead to a loss of the printing jobs in progress that are
stored in the printer’s memory.
Remove the card as follows:
1. Open the cover of the printer and remove the ribbon.
2. Press the push button from the Control Panel to run the transportation rollers. If the card is still
stuck inside the print
er, push it manually towar
ds the printer outlet. If ther
e are several cards,
always push the top one first.
3. Replace the ribbon then close the printer cover.
To prevent card jamming:
1. Mak
e sur
e that the c
ar
d thickness corresponds to the specifications in the ”Technical
Specific
ations”
section of this manual.
2. Check that the cards are not curved or stuck together.
35