User`s guide

23
State of the lights Interpretation Solution or explanation
■ The printer must immediately be
cleaned.
G
o to chapter 4 “Servicing and
Maintenance”.
■ The printer cover is open.
Close the cover of the printer.
The activity in course restarts.
■ There is a card jammed in the
printing station.
■ A mechanical part in the printer
is faulty.
Press the push button for one second.
If the problem persists, call your Evolis
reseller for assistance.
■ The orientation of the magnetic
track in the feeder is not correct.
■ The type of encoding has not been
correctly parameterised (HICO or
LOCO). Go to Chapter 5 of this
manual for more information.
■ The encoded data do not conform
to ISO 7811 or to the parameters
pre-defined in the properties of the
driver. Go to Chapter 5 of this
manual for more information.
Press the push button for one second.
The printer restarts the magnetic
encoding cycle with a new card.
Please check the data & parameters,
if the problem persists, call your
Evolis reseller for assistance.
■ The print head cooling system is
activated.
The printer stops working for a few
seconds. As soon as the print head
reaches the normal working tempe-
rature, the activity starts once more.
PRINTER CLEANING ALERT
(AFTER 500
INSERTIONS)
PRINTER COVER OPEN
MECHANICAL PROBLEM
ENCODING ERROR
COOLING MODE