User`s guide

1. Open the

printer cover

and locate the

printing head.

2. With one hand, push the rear metal

part under the cover and with the

other turn the two forks to remove the

printing head from the arm.

3. Disconnect

the cable/s

from behind

the printing

head.

Changing a print head

Evolis printer printing heads may be changed simply and effectively without any tools or special

adjustments.

Wait until the head is cool before working on it! Make sure the printer is turned off

Stage 1 – Removal of the faulty printing head

Correcting card jamming

Remove the card as follows:

Open the printer cover and remove the ribbon.

2. Remove the card by pressing the push button and/or pushing it manually towards the printer outlet.

If there are several cards, push the top one first.

3. Replace the ribbon then reclose the printer cover.

4. Press the push button on the control panel for one second.

To prevent card jamming:

Make sure the cards are correctly adjusted with the right thickness.

2. Make sure that the card thickness corresponds to the specifications in the ”Technical Specifications”

section of this manual.

3. Check that the cards are not curved.

4. Make sure that the cards are not stuck together.