User`s guide

State of the lights Interpretation Solution or explanation
PRINTER CLEANING ALERT
■
The printer has to be cleaned
(AFTER 1000 INSERTIONS) Go to chapter 3 “Cleaning”.
PRINTER CLEANING ALERT
■
The printer has to be cleaned
(AFTER 1200 INSERTIONS) Go to chapter 3 “Cleaning”.
PRINTER COVER OPEN
■
The printer cover is open
Close the printer cover. The activity in
course restarts.
MECHANICAL PROBLEM
■
There is a card jammed
■
A mechanical part in the printer is faulty
Press the push button for one second.
If the problem persists, call your Evolis reseller
for assistance.
ENCODING ERROR
■
The orientation of the magnetic track in the
feeder is not correct
∑
■
The type of encoding has not been correctly
parameterised (HICO or LOCO)
Go to Annexe A of this manual for more
information
■
The encoded data do not conform to ISO 7811
or to the parameters pre-defined in the
properties of the driver.
Go to Annexe A of this manual for mor
e
information
Press the push button for one second.
The printer r
estarts the magnetic encoding
cycle with a new car
d. If the pr
oblem persists,
call your Evolis reseller for assistance.
COOLING MODE
■
The print head cooling system is activated.
The printer stops working for a few seconds.
As soon as the print head reaches the normal
working temperatur
e, the activity star
ts once
more.
27