User`s guide

The push button returns the control panel to its original state after dealing with the follo-
wing cases:
■
ABSENCE OF CARD or INTERNAL PRINTER PROBLEM
■
ERROR IN MAGNETIC ENCODING
■
CARD EJECTION
The push button also enables:
■
The printer to be set to stand-by
■
A test card to be printed
■
A cleaning cycle to be started
Consult the following states of the control panel to determine the activity of the Pebble printer or the
nature of the problem:
State of the lights Interpretation Solution or explanation
PRINTER READY The printer is ready to receive data.
PROCESSING The printer receives data from one or several
of its interfaces.
END OF RIBBON
■
There is no ribbon in the printer
∑
■
The ribbon has finished
∑
■
The ribbon has been badly installed in the printer
∑
■
The ribbon is cut
Check the state of the ribbon in the printer.
If you are have a printing job in course, this
restarts with a new card.
NO CARD IN FEEDER
■
There is no card in the feeder
∑
■
The thickness of the cards has not been
cor
r
ectly adjusted
∑
■
The cards are curved
∑
■
The cards are stuck together
∑
■
The feeder is not pr
esent in the printer or
is badly inserted
Check the state of the cards in the feeder or
make sure that the feeder is present in the
printer and cor
r
ectly inserted Then, press
the push button for one second.
The printing restarts.
WAITING FOR A CARD
■
The printer is waiting for a card to be inserted
TO BE INSERTED The printer is fitted with the manual feed
tray option: inser
t a car
d in the printer.
Go to chapter 1 “Starting up”.
26