User`s guide

24
Maintenance of the cleaning roller
Cleaning cycle: on each ribbon change
Use: cleaning wipes
Your Pebble printer has a cleaning roller. Its adhesive surface holds the dust caused by the cards.
Although this roller is maintained when cleaning the inside of the printer, it is nevertheless advised to
clean it regularly and simply with a wipe provided in the cleaning kit to ensure that the surface of the
cards is perfectly clean.
To maintain the cleaning roller:
Following a cleaning cycle, wait two minutes for the cleaner to evaporate completely before
using the printer again.
1. Open the printer
cover. If there is one,
remove the printer
ribbon and locate the
cleaning roller.
2. Remove the
cleaning roller from
the printer.
3. Clean the roller with a
wipe from your
cleaning kit. Eliminate
all dust by lightly
rubbing the wipe on
the surface of the
roller.
4. When the roller is dry,
put it back in the
printer and close the
cover.