User`s guide

Cleaning the interior of the printer:

This simple cleaning system requires the use of pre-saturated cleaning cards specially conceived for the prin-

ter. A cleaning kit with samples of these cards is provided with your Pebble printer. By repeatedly passing the

card inside the printer, the card transport rollers, the cleaning roller, the print head and the magnetic head

(option) are all cleaned.

1 Remove the feeder from

the printer as shown.

4. Make sure that the feeder

is adjusted to the MAX

position.

2. Remove the cards in the

feeder.

3. Take a new cleaning card

and insert it in the feeder

as shown.

6. Remove the ribbon from

the printer as shown..

CLIC

5. Put the feeder back in the

printer. Then press on the

top of the feeder until it

clicks.

7. Close the printer

cover.

8. Press the push button on the

control panel for a second.

The cleaning starts.

9. The used cleaning card is

ejected in the output hopper.