User`s guide

Printing parameter setup

Before using your Pebble printer, it is best to check / modify the default parameters of the driver. Furthermore,

if you have options installed, you must declare them to the driver.

Your printer has numerous functions that can be parameterised in the printing manager. These printing para-

meters are accessible:

■ From Start in the Windows bar, Parameters and then Printers

Select Evolis Pebble

In File in the menu bar of Windows, select Default Document

■ From your Windows software:

In File in the menu bar of your application, select Print or Printing Set-up.

The procedures vary along with the type of software used and the Operating System.

Before using the printer, make sure that it is correctly selected as the default printer.

Selection of the Pebble printer as default

Proceed as follows to select the Pebble printer by default:

1. Click on Start in the Windows bar, select Parameters and then Printers.

2. Click on the Evolis Pebble icon and then point to File in the menu bar.

3. Select Define default and close the window.

Definition of the properties of your Pebble printer

Different dialog boxes enable you to:

■

Perform adjustments such as the orientation and the printing quality.

■

Manage the different printing modes and the use of suitable printing ribbons.

■

Select the printing port.

■

Activate the different control and maintenance functions of the printer.

Use of on-line help

A help file guides you in the use of each of the prin-

ting management parameters, depending on the dif-

ferent printing modes and criteria retained. In order to

familiarise you with these parameters, we recommend

you consult this help before any modification.

“Main” dialog box

This dialog box enables you to select:

Type of ribbon: the type of ribbon used

Orientation: the orientation of the printout in portrait

or landscape and the rotation of the printout 180º

Copies: the number of copies required of the card