User`s guide

Removing the printed cards
The Pebble printer is fitted with an output hopper with a capacity for 50 cards in 0.76 mm (30mil) format.
This is intended to receive the printed and/or encoded cards.
Other stages to the installation
You have now completed the installation (material) of your Pebble printer. For the moment, we would
urge you to carry on reading this manual and we would inform you that there are still two extra stages
to be followed to make your Pebble printer fully operational:
■ Installation of the driver
■ Printer cleaning
13
1. Locate the output hopper.
2. Remove the printed
and/or encoded cards as
shown.