User`s guide
12
To adjust the thickness of the cards using the feeder cage:
2. Adjust the thickness
of the cards used by
moving the handle from
right to left on the
required card thickness
1. Remove the feeder
from the printer as
shown.
3. Put the feeder back in the
printer. Then press on the top
of the feeder until it clicks.
max.max.
To adjust the card thickness from inside the printer:
CLIC
2. Remove the ribbon if there
is one in the printer. Then
adjust the thickness of the
cards used by moving the
handle from right to left
on the required card
thickness.
1. Open the printer
cover by pressing the
opening lever and
then turn it.
3. Reinstall the ribbon in the
printer and close the cover.
CLIC