User`s guide

Card loading

Placing the cards in the feeder

Card thickness:

• Pebble printers admit cards with a thickness of 0.25 mm to 1 mm.

Advice on card selection:

• Only use the type of cards appearing in the Technical Specifications in this manual

• Do not touch the printing surface of the cards, as this would affect the quality of the printing

• Do not use damaged or folded cards or cards with a raised texture

• Always keep new cards in a clean, dust-free place

2. Lower the spring system as shown and

insert 100 cards of 0.76 mm at most.

1. Remove the feeder from the

printer as shown.

3. Put the feeder back in the printer.

Then press on the top of the feeder

until it clicks.

CLIC

max.max.

max.max.max.