User`s guide

Description of the printer and its functions

We invite you to check the different components of your printer on the following drawings, to which

we will refer in this manual.

A Output hopper Collects the printed and/or encoded cards

B Cover lever Enables the printer cover to be opened and closed

C Card feeder Receives the cards for printing

D Control panel Shows the printer activity

E Manual card feeder Enables the cards to be inserted one by one (optional)

F Carrying handle Enables the printer to be carried

G Electrical connector Enables the printer to be connected to its power supply.

H Centronics parallel port (std) Enables data to be received and sent from and to the computer.

I USB port (std) Enables data to be received and sent from and to the computer.

J DB-9 connector (optional) Enables data to be received and sent from and to the computer

and coupler to be connected for chip cards personalization

K Flip Over module Rotates the card 180°

L Magnetic encoder Enables cards with magnetic tracks 1, 2 and 3 to be encoded

M Cleaning roller Removes all dust before the cards are printed

N Card thickness gauge Enables the thickness of the card to be adjusted from 0.25 mm to 1 mm

O Thermal print head Enables the cards to be printed in 300 dpi

P Identification label This label indicates the model and the serial number of the

printer