User`s guide

The lights on the control panel are represented in one of the following states:

SWITCHED OFF SWITCHED ON FLASHING

The push button returns the control panel to its original state after dealing with the following cases:

■ ABSENCE OF CARD or INTERNAL PRINTER PROBLEM

■ ERROR IN MAGNETIC ENCODING

■ CARD EJECTION

The push button also enables:

■ The printer to be set to stand-by

■ A test card to be printed

■ A cleaning cycle to be started

Consult the following states of the control panel to determine the activity of the Dualys printer or the

nature of the problem:

State of the lights Interpretation Solution or explanation

The printer is r

eady to r

eceive data.

The printer r

eceives data from one

or several of its interfaces.

■ Ther

e is no ribbon in the printer

■ The ribbon has finished

■ The ribbon has been badly installed

in the printer

■ The ribbon is cut

Check the state of the ribbon in

the printer. If you are have a printing

job in course, this restarts with a new

card.

PRINTER READY

PROCESSING

END OF RIBBON